DUTY 01
Ceramic parts for pumps, valves and fluid handling
Where a metal seat wears oval, a ceramic one holds its form. These are the parts that sit in the flow path and take the wear so the pump body does not.
Open this dutyBY DUTY
Start from what the part has to do
Shape and material are how a part is made. Duty is why it exists. These six pages group the catalogue by the job the part performs, so a worn component can be replaced without knowing what the supplier called it.
DUTY 02
Ceramic wear parts, liners and guides
Abrasion is a budget line, not a failure. Ceramic liners move that line down by changing what wears — and how often someone has to climb into the machine.
Open this dutyDUTY 03
Ceramic insulators, standoffs and insulating tubes
Insulation is easy until the part also has to be hot, or loaded, or outdoors. Ceramic keeps insulating where polymer has already tracking-failed.
Open this dutyDUTY 04
Ceramic parts for furnaces, kilns and molten metal
Above a certain temperature the question stops being "which metal" and becomes "which ceramic, and what happens when it cools".
Open this dutyDUTY 05
Ceramic parts for vacuum, plasma and high-voltage equipment
In a vacuum chamber, a part has to be dimensionally exact, electrically insulating, and clean enough not to become the contamination source.
Open this dutyDUTY 06
Ceramic rods, balls and discs for measurement and contact
When the contact point is the measurement, a part that wears by a micron per month is a calibration problem rather than a maintenance one.
Open this dutyContinue
Other pages in this catalogue
Or reach the same catalogue from the material side, or from the shape.